Stash busting: Knit Stirrup Pants / OOP Vogue 7630

Last month I made a pair of stirrup pants to wear while doing yardwork and hopefully prevent tick bites.  Yeah, that is a thing now.  But I digress.  The stirrup pants are so comfortable, I've been wanting to make another pair but not for yardwork, just for everyday sort of wear.  

This time around, I used a cotton knit fabric.  I like how they turned out, they feel like they have more ease than the first pair which was made with a non-knit fabric.  I could certainly tighten up that waistband elastic but I'm waiting to try these with the back brace on before I commit to cutting down the elastic.  The pants were shortened just like the first pair.  I did reshape the ankle side widths, used a machine blind hem along the edges and then added the elastic.  

Sewing IS Political

This is another Canadian made and tariff free project.  The fabric has been in the stash for many years, well before the convicted felon started threatening the world.   It came from Marshall Fabrics, a Canadian fabric outlet.  The Very Easy Very Vogue pattern is a made in the USA product but did not contribute to the convicted felon's economy.  It was a vintage find, circa 1989, purchased from a Canadian reseller.  The label is from Kylie and the Machine (KATM), an Australian company.  The scissors used in the making of these stirrup pants are from Merchant and Mills, a U.K. company and were purchased at The Workroom, a Canadian fabric outlet.  The threads and elastic were pulled from the stash, purchased at Fabricland, another Canadian fabric outlet.  

Project details

Seams:  Knit (lightening bolt) stitch

Seam finish:  Serged

Fabric:  1.8 metres

Elastic:  0.8 metres

Label:  1--"me made" KATM label

Pattern:  OOP and vintage Vogue 7690, circa 1989

Additional Tools and Supplies:  Cutting table, pins, pin cushion, tailor's chalk, measuring tape, scissors, thread clippers, canned air, Janome 4120 QDC sewing machine, regular presser foot, threads, Janome AirThread 2000D serger, safety pin, clips and warm milk with honey.  

Stand strong, elbows up and keep sewing.  

Stash Busting: Cotton Sateen Curtains

One more set of curtains rolled off the worktable this weekend.  This pair is made out of 100% cotton sateen sheet fabric.  I'm not upcycling here, this is a new fabric that I pulled from the stash.  Well, not really new, its been there for years.  But I digress.  

The open panel shown here is one 1/2 of the width of the fabric.  I actually cut it down the centre.  Same finishing as the previous version, a three inch upper casing for the curtain rod and a two inch hem.  

Sewing IS Political

This is one more Canadian made and tariff free project.  The fabric was in the stash for many years and was discovered in the home décor section at Marshall / Northwest Fabrics, a western Canadian fabric outlet.  The thread was pulled from the stash and is another item that has been there for years since I stopped purchasing Coats and Clark thread.  The fabric scissors used to cut the fabric are Merchant and Mills, a U.K. company and were purchased from The Workroom, another Canadian fabric outlet.   

Project details

Seams:  3.0 straight stitch

Seam finish:  Serged

Fabric:  1.5 metres

Additional Tools & Supplies:  Cutting table, fabric scissors, ruler, measuring gauge, measuring tape, Janome 4120 QDC sewing machine, Janome AirThread 2000D serger, threads, walking foot, thread clippers, iron, ironing board, back brace and tea.  

Stand strong, elbows up and keep sewing.   

Stash and Scrap Busting: Back-up Curtains

 

There was quite a bit of yardage of this home décor fabric in the stash.  There was not fixed project in mind other than it was a discounted to the point that I couldn't resist the bargain.  It first made an appearance here last week when I made a pair of curtains.  And at that point I knew that I was going to make a second pair.  Tada!  

I still have 0.49 metre left over and I think I will be able to squeeze out one more reusable grocery bag with the last bit of fabric, we'll see.  

Sewing IS Political

This is another Canadian made and tariff free set of curtains.  The stash fabric was discovered at Fabricland, a Canadian fabric outlet.  All the measuring tools (ruler, measuring gauge, measuring tapes) used have been in the workroom from a pre-trade war era.  The Gütermann threads used in the sewing machine and serger were sitting in the stash and are products of the U.S., purchased prior to the convicted felon's 2.0 tariff war.  The threads were purchased at Fabricland and future thread purchases will, obviously, have to be scrutinized more closely.  Maple washing is not just happening at the grocery store.  The fabric scissors are from Merchant and Mills, a U.K. company and were purchased at The Workroom, another Canadian fabric outlet.  

Project details

Seams:  3.0 straight stitch

Seam finish:  Serged

Fabric:  3 metres

Additional Tools and Supplies:  Cutting table, fabric scissors, tailor's chalk, straight ruler, measuring tape, measuring gauge, Janome 4120 QDC sewing machine, walking foot, Janome AirThread 2000D serger, thread clippers, ironing board, iron, back brace, pins and pin cushion.  

Stand strong, support local, elbows up and keep sewing.  

Stash busting: Another Curtain Project

Here's the latest curtain project.  I really like this blue printed cotton fabric.  The plan was to turn this fabric into a dress with my eye on McCall's 8090.  And then once again, plans changed.  The fabric was used for a set of kitchen curtains.  The lightweight 100% cotton fabric was previously pretreated with a tumble in the washing machine and dryer and was ready to hit the cutting table.  

Sewing IS Political

This is another Canadian made and tariff free sewing project.  The fabric has been in the stash before the convicted felon's tariff and trade war.  These are times for sewing the stash or just plain reconsidering a project as fabric prices continue to increase.  Even threads are hit with price increases that makes one reconsider colour matching.  A close enough colour of thread will do just fine, as in this case (blue thread for top-stitching and beige threads for the serger).  The fabric was an end of the season discounted item from many moons ago.  I found this fabric at Fabricland, a Canadian fabric outlet.  The Gütermann threads were pulled from the stash and also came from Fabricland.  The fabric scissors used to cut out this project are from Merchant and Mills, a U.K. company and were purchased from The Workroom, another Canadian fabric outlet. 

Project details

Seams / Top-stitching:  3.0 straight stitch

Seam finish:  Serged

Fabric:   2.5 metres

Additional Tools & Supplies:  Cutting table, pins, pin cushion, tailor's chalk, measuring tape, ruler, fabric scissors, Janome 4120 QDC sewing machine, walking foot, Janome AirThread 2000D serger, threads, thread clippers, measuring gauge, iron, ironing board and tea.  

Stand strong, elbows up, support local businesses and keep sewing.  

Stash busting: New Curtains

This is a simple project after measuring and cutting out the fabric.  This gifted project came to be after it was spotted in the stash and dreams of new curtains started to materialize.  I, on the other hand, saw this fabric at the store as a potential coating toile fabric or perhaps some more reusable grocery bag fabric.  The curtain project won in claiming this fabric.  And I think they turned out lovely, so I am glad that plans changed along the way.  

The fabric was a discounted bargain find in the home décor department.  It was such a great bargain that I bought the remaining bolt deciding that I will figure out its future at a later time.  It now looks like another set of curtains will be made with the remaining yardage.  The curtains are fifty-four inches long, have a two inch hem on the bottom and a three inch opening on top for the curtain road.  

Sewing IS Political

This is another Canadian made and tariff free project.  Everything used to make these curtains were found in the stash.  The fabric was a bargain find in the home décor section at Fabricland, a Canadian fabric outlet.  No pattern needed but the measuring tools used to measure the fabric has been in the stash for years, circa pre-Trumpian economic warfare.  The scissors used to cut the fabric are from Merchant and Mills, a U.K. company and were purchased from The Workroom, another Canadian fabric outlet.  The threads are all Gütermann threads pulled from the stash.  

Project details

Seams / Topstitching:  3.0 straight stitch

Seam finish:  Serged

Fabric:  3 metres

Additional Tools & Supplies:  Cutting table, pins, pin cushion, tailor's chalk, fabric scissors, rulers, measuring tape, measuring gauge, Janome 4120 QDC sewing machine, walking foot, Janome 2000D AirThread serger, threads, thread clippers, iron, ironing board and a good cup of Canadian coffee.  

Stand strong, elbows up and keep sewing.  

Stash busting: A New Blanket

More practical sewing has hit the worktable, this time a new blanket.  This fabric entered the stash last year and a bit of it was used to make this skirt.  And then quite a bit a whole lot of yardage sat in the stash.  It was on sale, in the bargain section.  But I digress.  There was once a thought to make this Pace Cardigan to match the skirt and then plans changed.  The skirt has since been donated.  And the fabric sat in the stash until today.  Yes, that's right, in the middle of summer during heat warnings, I decided to turn this fabric into a blanket.  

When cooler temperatures arrive, this one will replace this blanket that I made last year which has not held up well.  We'll have to wait and see how this new blanket holds up.  

Sewing IS Political 

This is a Canadian made and tariff free project.  All the tools and supplies used to make this project were found in the stash.  The fabric and threads came from Fabricland, a Canadian fabric outlet.  The clips were made in Taiwan and purchased at Lilax Studio, another Canadian fabric outlet.  

The scissors used on this fabric are from Merchant and Mills, a U.K. company and were purchased at The Workroom, a Canadian fabric outlet.  

Project details

Seams / finish:  Rolled hem 

Fabric:  4 metres

Additional Tools and Supplies:  Cutting table, fabric scissors, fabric clips, Janome AirThread 2000D serger, threads, thread clippers.  

Stand strong, elbows up and keep sewing.  

Stash busting: New Cotton Knit Slip / Kwik Sew 3645

Another cotton knit slip is hot off the worktable.  After some much appreciated feedback on the toile, it is time to make another.  

Out-of-print (OOP) Kwik Sew 3645 turned out to be a perfect pattern for this project.  The request was for a undershirt / tank top style strap.  The pattern is designed as sleepwear but it also turned out to be perfect option for sewing a slip.  The changes made on the toile were repeated here; shortened the shoulder seam by three-quarters of an inch, straightened and shortened the hemline and added about two inches extra ease from the hemline by pivoting from the centre back and front neckline points.  I transferred all the changes to the copied pattern piece.  The pattern pieces were cut two inches shorter and three quarters of an inch at the shoulder seam.  Now the pattern can be considered a true and tested pattern.  

The armholes and neckline were finished with Knit 'N Stable tape, serged and then folded over and top-stitched using the knit stitch on the sewing machine.  The hem was turned up an inch, basted and cover stitched.  

This fabric has been in the stash for decades and was purchased at the same time as the floral print knit used for the toile slip.  I bought them together thinking that they would be the fashion and lining fabric for a wrap dress and then plans changed.  It was nice to finally stash bust this fabric and at the same time a bit sad because working with it, it became obvious that this is a fabric from a by-gone era.  They don't sell cotton knit fabric of this exceptional quality now-a-days.  ~sigh~  I was careful to set aside the remnants with plans to cut underwear pattern pieces for a future sewing project.  But I digress.  The fabric was previously pretreated with a spin in the washing machine and dryer before hitting the cutting table.  

Sewing IS Political

This is a Canadian made sewing project.  The fabric came from Fanny Fabrics many moons ago prior to the global tariff war.  Fanny Fabrics is a now closed Canadian Fabric outlet.  The pattern, OOP Kwik Sew 3645, was recently purchased from an American Ebay seller.  The original copy of the pattern that was in the stash is lost.  And sometimes when you are sewing for someone you love, you just sometimes have to forget the boycott for a moment.  There was a search for a Canadian seller who might have this pattern listed but I came up empty.  I tried.  The threads used in the machines and for hand basting were all found in the stash and were purchased at Fabricland, a Canadian fabric outlet.  Same with the basting tape.  The fabric scissors are from Merchant and Mills, a U.K. company and were purchased from The Workroom, another Canadian fabric outlet.  

Project details

Seams:  Knit (lightning bolt) stitch

Seam finish:  Serged and Cover stitch

Fabric:  2.0 metres

Knit 'N Stable tape:  2.2 metres

Pattern:  OOP Kwik Sew 3645, circa 2012

Additional Tools and Supplies:  Cutting table, paper scissors, pencil, fabric scissors, pins, pin cushion, Janome 4120 QDC sewing machine, walking foot, Janome CoverPro 1000CP, Janome 2000D serger, threads for the machines and basting, hand sewing needle, screwdriver, tweezers, thread clippers, iron, ironing board and ice tea.  

Stand strong, elbows up and keep sewing.  

Stash busting: Bike shorts / OOP Vogue 1214

There was a request for a pair of bike shorts that came across the worktable.  These are not meant to be seen out in public as they will not be used for biking.  Instead, these shorts will be worn as a layering piece under clothes.  That's the plan.  

This one is, hopefully, a wearable toile.  I'll have to wait for feedback on the fit before proceeding to make these in a better fabric.  

Out-of-print (OOP) Vogue 1214 was used to make these, shortened, of course, to make it a shorts pattern.  A pair of RTW biking shorts were used as the guide for the length.   I cut these as a size 18 and so far they seem to fit in the waist but they are loose in the leg and actually look like regular shorts, not biking shorts or leggings.  They is no skin hugging in the leg and at the hem.  The initial feedback on the first fitting is to raise the back centre seam about 1/4" and to add some elastic at the waistband.   I would like to try and narrow the width at the hemline.  

Sewing IS Political

This is another Canadian made and tariff free project. The fabric has been in the stash for years and came from Marshall Fabrics, a Canadian fabric outlet.  The pattern is a printed in U.S.A. product from 2010, coming into the pattern stash before the convicted felon started a global tariff war.  It did not contribute to the convicted felon's economy or his economic war machine.  The threads were all pulled from the stash, mostly Gütermann threads and came from Fabricland, a Canadian fabric outlet.  The fabric scissors used are from Merchant and Mills, an U.K. company and were purchased from The Workroom, a Canadian fabric outlet.  

Project details

Seams:  Knit (lightening bolt) stitch

Seam finish:  Serged and Cover stitch

Fabric:  1 metre

Pattern:  OOP Vogue 1214, circa 2010

Additional Tools and supplies:  Cutting table, paper scissors, measuring tape, fabric scissors, pins, pin cushion, tailor's chalk, hand sewing needle, Janome 4120 QDC sewing machine, Janome CoverPro 1000D machine, Janome AirThread 2000D serger, walking foot, threads, thread clippers, iron and ironing board.  

Stand strong, elbows up and keep sewing.  

Stash busting: Lightweight Wool Toaster Sweater

This is another Toaster Sweater that I made to go with this skirt.  In reality, it will go with a few more pieces in the closet.  Bonus:  it is oversized, so, it can be worn over the back brace.  

There are two Toaster Sweater patterns in the stash, out-of-print (OOP) Simplicity 8529 and this Sew House Seven version.  This one has a cuff-less sleeve and the finish on the neckline is quite nice.  Even though both patterns are by Sew House Seven, this version is my favourite.  The sweater was cut as a size 20 on the sides.  The length on the sleeves were shortened.  That is about it.  

The fabric is a lovely lightweight wool knit from Winnipeg Sews.  It was pretreated with a tumble in the washing machine and the dryer.  I know, gasp!  Thankfully, it survived the pre-treatment.  It's soft and I will be taking greater care going forward.  

Sewing IS Political

This is another Canadian made and tariff free project.  Most of the supplies needed to sew this project were found in the stash.  The previously mentioned fabric was in the stash for a few years and came from a now-closed Canadian fabric reseller.  The pattern is from an American independent pattern designer and came into the stash prior to the convicted felon and his cohort starting a global tariff war and disrespectful rhetoric.  Therefore, the pattern did not contribute to the convicted felon's tariff economy. 

The label is from KATM, an Australian company.  The fabric scissors are from Merchant and Mills, an U.K. company and were purchased from The Workroom, a Canadian fabric outlet.  The threads are a recent purchase since I didn't have any threads that were close in colour to the fabric.  For the sewing and CoverPro machines, I ended up going with Coats and Clark cotton thread which were made in Mexico.  The threads for the serger are Gütermann threads.  All of the threads came from Fabricland, another Canadian fabric outlet.  

Project details

Seams:  Knit (lightening bolt) stitch

Seam finish:  Serged and cover stitched.  

Fabric:  1.7 metres

Pattern:  Sew House Seven's Toaster Sweaters

Label:  1--"Made with love" KATM label

Additional Tools and Supplies:  Cutting table, fabric scissors, assorted heavy objects used as pattern weights, measuring tape, measuring gauge, Janome 4120 QDC sewing machine, threads, walking foot, Janome AirThread 2000D serger, Janome CoverPro 1000CP, tweezers, thread clippers, hand sewing needle, basting thread, iron, ironing board, heating pad, many breaks, and tea. 

Stand strong, elbows up and keep sewing.  

Stash busting: Black Cotton Pants / Butterick 6717

The latest version of Butterick 6717 was given a little more ease at the sides to see if they will fit more comfortably over the lower part of the back brace.  

And it worked!  There was also a little more ease added at the inner leg near the crotch area.  The length was shortened as well.  The hem lengths differ because of the shortness of one leg, all thanks to scoliosis.  But I didn't want to commit to a one inch hem because the shoes that I will wear with these have not been adjusted for the height difference.  This will give me the option to fix the hem if I loosen the purse strings for the shoes adjustments.  But I digress.  I left off the pockets on this pair, with the hard plastic of the brace it won't be an easy feature to use.  I'm just happy that I can wear these with the back brace.  

I used a printed copy of this pattern which I picked up years ago.  It is currently only available in PDF format.  I'm not a fan of PDF format patterns and I would have skipped this pattern if it were the only option back then.  I grateful to have the printed copy, the pattern for the pants is wonderful.  I like the dart free front and the elastic back is comfortable to wear.  I also like the shape of the leg.  

The fabric was labelled as a 100% cotton, I'm not a 100% sure about that claim.  I guess time will tell in how it wears.  It is the same fabric that I used to make this skirt.  It was pre-washed before hitting the cutting table and ironing board.  

Sewing IS Political

This project is another Canadian and tariff free creation.  All of the supplies required to make the pants were found in the stash.  The fabric came into the stash via Fabricland, a Canadian fabric outlet.  The elastic is Tailor brand and was made in China and also came from Fabricland.  The cotton thread used in the sewing machine is from Gutermann threads and was made in Greece.  The threads used in the serger are a combination of Gutermann threads and H.A. Kidd, a Canadian company, and were labelled as made in China.  All of the threads were purchased from Fabricland.  The scissors used to cut this project were made in Taiwan and purchased from Fabricland.  Butterick 6717, is an American product that entered the stash in twenty twenty-two before the convicted felon's resumed his tariff war on the world.  

Project details

Seams:  2.8 straight stitch

Seam finish:  Serged

Fabric:  1.5 metres

Elastic:  0.7 metres

Pattern:  Butterick 6717, circa 2019

Label:  1--KATM label

Additional Tools and Supplies:  Cutting table, pins, pin cushions, measuring tape, measuring gauge, fabric scissors, iron, ironing board, tailor's ham, screwdriver, tailor's chalk, Janome 4120 QDC sewing machine, walking foot, blind hem foot, safety pin, Janome AirThread 2000D serger, thread clippers, threads, back brace and tea.  

Stand Strong, elbows up and keep sewing.  

Stash busting: And Then There Were Two

There was just enough cotton knit left over to sew one more body sock.  And a head band.  

Now that I have two extra body socks made, the original ones from Brace Buddies were shortened, basted and cover stitched.  

Project details

Seams:  Knit (lightening bolt) stitch

Seam finish:  Serged and Coverstitched

Fabric:  1 metre

Pattern:  None used for the head band, the body sock was copied from the original Brace Buddies

Additional Tools and Supplies:  Cutting table, measuring tape, straight ruler, tailor's chalk, fabric scissors, hand sewing needle, silk thread for basting, Janome 4120 QDC sewing machine, walking foot, lint brush, screwdriver, tweezers, threads, Janome CoverPro 1000CP, Janome AirThread 2000D serger, thread clippers, iron and ironing board.  

Elbows up and keep sewing.   

Stash busting: Yes!, It's Another Elastic back skirt / OOP Vogue 1247 and Vintage Vogue 9918

The plan to replace out-of-print (OOP) Vogue 1247 skirts with the waistband and back zipper continues.  The versions I had once upon a time have found a new home and yes, it was hard to let them go.  These are versions that reflect my new reality and can be worn over the lower part of my back brace.  

This skirt was made with a medium weight 100% cotton fabric that I found in the home décor department.  The design is a combination of OOP Vogue 1247 and vintage Vogue 9918.  The front of the skirt resembles OOP Vogue 1247 and the back is all vintage Vogue 9918.  The front of OOP Vogue 1247 kept the integrity of those lovely pockets.  The front dart were eliminated and the front waist adjusted.  And of course, I lengthened the bottom of the skirt Vogue 1247 but also shortened the hem from the back piece of Vogue 9918.  The skirt hits below the knee.  

Sewing IS Political

This skirt is another Canadian made and tariff free project.  The fabric is a cotton print found in the home décor department at Fabricland, a Canadian fabric outlet.  As was the elastic used in this project.  The Vogue patterns, although being products of the U.S.A., did not contribute to the convicted felon's wars or tariff economy.  Vogue 1247 has been in the stash for years and I made the first version in 2012.  Vintage Vogue 9918, circa 1980s, came into the stash in 2023 prior to the global boycott against annexation rhetoric and tariffs.  The threads are cotton Gütermann threads and were labelled as made in Greece.  They were purchased from Marshall Fabrics, a Canadian fabric outlet.  The scissors used to cut this project are from Merchant and Mills, a company from the United Kingdom.  They were purchased from The Workroom, another Canadian fabric outlet.  

Project details

Seams:  2.8 straight stitch

Seam finish:  Serged

Fabric:  1.2 metres

Elastic:  0.45 metres

Patterns:  OOP Vogue 1247 (circa 2011) and vintage Vogue 9918 (circa 1980s)

Additional Tools & Supplies:  Cutting table, fabric scissors, tailor's chalk, measuring tape, dressing making ruler, curve ruler, pins, pin cushion, Janome 4120 QDC sewing machine, walking foot, blind hem foot, Janome AirThread 2000D serger, threads, thread clippers, tweezers, safety pin, iron, ironing board and tea.  

Stand strong, elbows up and keep sewing.  

Stash busting: Merino Wool Cardigan / OOP Kwik Sew 4192

 

Out-of-print (OOP) Kwik Sew 4192 hit the cutting table one more time.  And I am almost finished stash-busting the last of this black merino wool fabric.  Looking back on the blog, this fabric has been in the stash for at least nine years.  There is not enough left-over fabric for another cardigan, but maybe a sleeveless turtleneck?  Or more socks?  But I digress.  This cardigan is another piece that will fit into my Sudoku Wardrobe grid as a layering piece.  

The fabric is a lightweight merino wool that I found at Marshall Fabrics many moons ago as a bolt priced at $3.99 / metre or 99¢ if I purchased the whole bolt.  It was part of a collection of used bolts from a closed dressmaking shop.  And it was a bargain unheard of today.  How times have changed!  Of course, I took the whole bolt.  I can't remember how many metres were on the bolt but over the years, I've made five sweaters, many socks and a maxi-length turtleneck dress that is now re-fashioned as a skirt.   

There were a few modifications made to this version.  I added more ease at the side seams.  And pivoted at the centre back fold line at the neck adding more ease at the hemline at the centre.  I decided to leave the edges unfinished.  The previous versions have a rolled hem finished on the serger.  

Sewing IS Political

This is another Canadian made and tariff free garment.   The fabric, as mentioned, came from Marshall Fabrics, a Canadian fabric outlet.  The Kwik Sew pattern entered and left the stash before the convicted felon started a global tariff war.  I made a copy of the cardigan pattern before I resold the original pattern.  The scissors used to cut out this project are from Merchant and Mills, an U.K. company, purchased from The Workroom, a Canadian fabric outlet.  The Gütermann threads were pulled from the stash and likely came from Fabricland or Marshall Fabrics, both Canadian fabric outlets.  

Project details

Seams:  Knit (lightening bolt) stitch

Seam finish:  Serged

Pattern:  OOP Kwik Sew 4192

Additional Tools & Supplies:  Cutting table, pattern weights, tailor's chalk, measuring tape, pins, wrist pin cushion, Janome 4120 QDC sewing machine, walking foot, Janome AirThread 2000D serger, threads, thread clippers, iron and ironing board.  

Stand strong, elbows up and keep sewing.  

Stash busting: Elastic back skirt / OOP Vogue 1247 and Vintage Vogue 9918

Since the first one turned out, I cut three more versions.  Here is the first of the lastest versions I am currently working on.  I want to replace my Vogue 1247 (Rachel Comey) skirts with elastic waist versions so I can wear them with the back brace.  The three versions that I previously had in my wardrobe have found a new home.  

There is a wee bit more ease with the versions I am currently working on, a half inch extra ease.  The hem length was extended and an inch and a quarter blind hem was sewn.  Otherwise, it's similar to the first version.  I really hope this is not a cotton and polyester blend because if there is pilling, it will be sad.

The fabric was labeled as a black cotton twill but after cutting the fabric and observing the fraying, I'm starting to suspect a misleading label hiding another fibre in the mix.  I will have to do a burn test to see if my suspicion is correct.  It doesn't feel or sew like other cotton fabrics I have used in the past.  I really hope and pray this is not a cotton / polyester blend which I have sewn in the past and dealt with pilling after a few wears.  I will be sad if that happens with this one since I really like the fit of this skirt.  

Sewing IS Political

This skirt is a Canadian made and tariff free project.  All of the required supplies were pulled from the stash.  The fabric and elastic came from Fabricland, a Canadian fabric outlet.  The Vogue patterns are  made in the U.S.A. items but they did not contribute to the convicted felon's tariff and blackmail economy.  Vogue 1247, circa 2011, has been in the stash for years.  Vogue 9918 is a vintage pattern from the 1980s that I picked up from an American reseller in 2023, prior to the convicted felon's 2.0 economic threats against Canada and the resulting boycott.  The cotton Gütermann threads used in the sewing machine was made in Greece and purchased from Fabricland.  I am finding that Fabricland's selection of polyester Gütermann threads made in the USA is expanding and their selection of European made cotton threads is dwindling.  And I've even noticed that some of their stock is void of the country of origin on the label.  Hmmm?  The fabric scissors used to cut out this project are from Merchant and Mills, an United Kingdom company and were purchased from The Workroom, a Canadian fabric outlet.  The label was recycled from a previous project.  It originally came from KATM, an Australian company.  

Project details

Seams:  2.8 straight stitch

Seam finish:  Serged

Fabric:  1.2 metres

Elastic:  0.5 metres

Label:  1--recycled "Me Made" KATM label

Patterns:  OOP Vogue 1247 (circa 2011) and vintage Vogue 9918 (circa 1980s).

Additional Tools and Supplies:  Cutting table, pins, pin cushion, tailor's chalk, fabric scissors, measuring tape, measuring gauge, Janome 4120 QDC sewing machine, walking foot, blind hem foot, thread clippers, threads, Janome AirThread 2000D serger, iron, ironing board, seam ripper and safety pin.  

Stand strong, elbows up and keep sewing.  

Stash busting: Black Wool Knit Palazzo Pants / OOP Vogue 1334

Out-of-print (OOP) Vogue 1334 is all about comfort.  It has an elastic waistband that I can slip over the lower part of the back brace.  And I love the wide legs on these palazzo style pants.  It has a retro vibe that remind me of late 1960's Italian fashion and designers like Emilio Pucci.  Minus the vibrant patterned fabric, this pair is all about comfort in a neutral colour.  

This is a Today's Fit pattern by Sandra Betzina.  They actually turned out better than I hoped after reading some insights found on Pattern Review.  I have no dislikes to report.  This is an easy pattern to sew and came together quickly.  I would absolutely recommend this pattern for a beginner willing to give sewing knits a try.  Sandra Betzina lays out different fabric, fit and fabric scenarios to help make this pattern a success.  I highly recommend reading the "Before You Start" section of the pattern instructions. 

The only changes to the pattern was to cut the pants at a size F with the exception of size G at the side seams which I graded back down to F by the notch marking.  I wanted the extra bit of ease since I will be wearing these over the brace.  The hem length were cut at the smallest size.  The elastic width that the pattern calls for is a one inch width but I thought that the crotch length looked too big so I went with a two inch wide elastic.  I could have gone with a one and a half inch elastic if there was any left in the stash.  I was working with what I have on hand.  I would like another pair of these pants (they are that comfortable!) and I do have some gray French terry to make another pair, so I think there might be an elastic run in the near future.  

The photo of my pants do look much wider than the photo on the pattern envelope.  I wonder if this a reflection of the "Make the legs narrower" instructions listed within the "Before You Start" section?  Or maybe the pants on the pattern photo were made in a woven fabric?  Sandra Betzina also outlines how to make the fabric switch.  I wish the patterns would mention what fabric was used in their samples.  Anyway, these are the only things that may explain why there appears to be a difference in the drape and width between this project and the sample photo on the pattern envelope.  

The fabric is a medium weight wool knit and it has a lovely drape.  It was pre-treated with a tumble in the dryer along with damp towels. 

Sewing IS Political

This is a Canadian made and tariff free project.  All of the supplies used to make these pants were found in the stash.  The medium weight merino wool is the same fabric used for this hooded scarf and has been in the stash for a couple of years prior to the convicted felon's tariff war.  It came from Marshall Fabrics, a western Canadian fabric outlet.  The Vogue pattern is a recent Etsy purchase from a Canadian reseller.  The threads are Gütermann Threads and have been in the stash for a long time, likely from Fabricland, another Canadian fabric outlet.  The scissors are from Taiwan and were purchased from Fabricland.  The elastic is also came from Fabricland.  The label is from KATM, an Australian company.  

Project details

Seams:  Knit (lightening bolt) stitch

Seam finish:  Serged

Fabric:  4.5 metres (this fabric was 110 cm wide)

Elastic:  1.4 metres

Pattern:  OOP Vogue 1334, circa 2012

Label:  1--"one off" KATM label

Additional Tools & Supplies:  Cutting table, cardboard cutting mat (for table extention), pins, wrist pin cushion, paper scissors, fabric scissors, tailor's chalk, Janome 4120 QDC sewing machine, walking foot, threads, Janome AirThread 2000D serger, tweezers, thread clippers, iron, ironing board, safety pin and coffee.  

Stand strong, elbows up and keep sewing.  

Stash busting: Scoliosis Brace Cover / Body Sock

 

One more extended tube top / scoliosis brace cover / body sock.  Chose your label.  This is an undergarment that I can wear under the brace and turn it up from the bottom to cover the velcro straps and hopefully protect my clothing that I wear over the brace.  I copied the genius design from Brace Buddies, they get all the credit.  I highly recommend their products, I'm just trying to use up the stash and make a few at home. 

Sewing IS Political

This is another Canadian made and tariff free project.  I should also mention that my inspiration from Brace Buddies is also a Canadian company--Go Canada!   The fabric is a cotton knit French terry from Marshall Fabrics, a Canadian fabric outlet.  The fabric scissors used to cut this fabric is a product from Taiwan, purchased from Fabricland, another Canadian fabric outlet.  The threads were pulled from the stash, all Gütermann Threads.  The cotton thread used in the sewing machine was made in Greece.  The polyester thread used in the serger was made in the U.S.A. purchased prior to the boycott.  

Project details

Seams:  Knit (lightening bolt) stitch

Seam finish:  Serged

Fabric:  1 metre

Pattern:  None used, copied shape from a previously purchased Brace Buddies body sock.  

Additional Tools and Supplies:  cutting table, pins, fabric scissors, tailor's chalk, Janome 4120 QDC sewing machine, walking foot, Janome AirThread 2000D serger, thread clippers, measuring tape, measure gauge, iron, ironing board and tea.  

Stand strong, elbows up and keep sewing.