Side note: McCall's 3333 was once upon a time, part of my pattern collection. And I did make the front tie pullover dress. It was pre-blogging and pattern review days, so I do not have any photos or reviews to share of the dress. I do remember feeling self-conscious about how low the front neckline fell and trying to adjust how it fit. It is also a short bias cut garment. I was more of a maxi length gal so I didn't hold onto it for long. There was a lot that I did like, the bias cut, tie front, and the sleeve variations were lovely design features. It would have been a tweak-worthy pattern but at the time I never got around to it. But I digress, this is supposed to be a review on the skirt.
I really like that it is one pattern piece and a simple shape. I did add more ease increasing the largest size by adding a half an inch to the side seams. It provided an extra two inches in required width. The elastic insertion is for a fold-over elastic technique which is quite lovely. I went another route, a casing to insert the elastic just in case I need to adjust the elastic. I turned the waistline down one inch as instructed and used 3/4" elastic instead of the recommended one inch elastic. I also lengthened the hem two inches and wish I lengthened it more. I guess I'm still partial to maxi lengths. To fix this issue and not use the recommended hem width from the pattern, I searched for some seam binding. There was none to be found in the stash that matched the colour of the skirt. And then the solution was sitting in the pile of fabric scraps.
There was enough scraps to make matching wool bias tape. It's been a while since I made bias tape. It was quite rewarding and worked out better than any store bought tape.
The fabric is a wool suiting fabric that has been in the stash for many, many years (about thirteen years). It is left-over from this project. The pattern fabric suggestions include crepe, jersey knits, soft faille and crepe back satin. So, I figured that I could make it work and I'm glad I took the risk. I have another project cut out in this fabric and hope to have a coordinating outfit with this skirt.
The wool fabric was previously pretreated with a tumble in the dryer with some damp towels before hitting the cutting table. This will be a gentle hand wash garment going forward.
Sewing IS Political
This is another proudly Canadian and tariff free project. The fabric came into the stash during the peaceful pre-Trumpian era. This wool suiting fabric was found at Marshall Fabrics, a Canadian fabric outlet. The vintage pattern is not the original copy I had in the stash as I needed to size up. It was, surprisingly, found at a Canadian second hand store and became a nostalgic purchase. The fabric scissors used to cut the fabric are from Merchant and Mills, a U.K. company and were purchased from The Workroom, a Canadian fabric outlet. The label is from Kylie and the Machine (KATM), an Australian company. The cotton Gütermann threads are not stamped with country of origin but are leftover from previous decades' old projects. They were likely purchased at Fabricland or Marshall Fabrics, Canadian fabric outlets.
Project details
Seams: 2.8--3.0 straight stitch
Seam finish: Serged
Fabric: 1.7 metres
Elastic: 1.1 metres
Pattern: OOP and vintage McCall's 3333, circa 2001
Label: 1 "OOH La La" label
Additional Tools & Supplies: Cutting table, measuring tape, measuring gauge, pins, pin cushion, pin dish, fabric scissors, paper scissors, Janome 4120 QDC sewing machine, walking foot, threads, thread clippers, Janome AirThread 2000D serger, iron, ironing board, clapper, bias tape maker, safety pin and a few breaks.
Stand strong, elbows up and keep sewing.




No comments:
Post a Comment