January in Review

Sewing

Top L to R:  3 cotton handkerchiefs, The Assembly Line's Tulip dress, Multi-coloured Silk scarf / headwrap, Butterfly print polyester scarf / headwrap, 

Bottom L to R:  Black and beige Silk scarf, Multi-coloured Silk scarf, Butterfly print polyester scarf, Denim shirtdress. 

In January, I managed to de-stash without adding any new fabric, patterns or supplies. Even though I was tempted by a couple of the Vogue Spring line of patterns. I held on to my pledge not to add anymore patterns to the stash. But I might have trouble with holding off on Vogue1678.  

• 10 metres of fabric
• 1.10 metres of basting tape
• 1 - 55 cm invisible zipper
• 1.5 metres of fusible interfacing
• 2 spools of thread
• 2 sewing machine needles
• 2 packages of bias tape

Happy Sewing!  

Troubleshooting Thursdays: Broken Needles

In the quest to save money on sewing machine repair bills let's explore possible issues that may appear to behind a sewing machine that breaks needles.

1.  Remove obstacles. 

Don't sew over pins!  If you break a needle while sewing over a pin make sure to take the time to check under the needle plate that make no lingering parts of the needle are left behind.  And sewing over pins even if the needle doesn't break, can cause the needle end to become blunt or can bend the needle.  

2.  Incorrect needle for machine.

Make sure that you're using the correct needle for your sewing machine.  Most sewing machines can take generic (Klasse, Schmetz and Lammertz) needles.  Check your sewing machine manual if your sewing machine will only use a variety of needles.  

3.  Incorrect needle for fabric.  

Use the correct size and needle type for the fabrics you are working with, specific fabrics (leather, knits, etc.) require specific needles.  Most sewing books have a fabric - needle - thread chart that provides a general guide to follow in testing out your options.  

4.  Pulling the fabric.

Let the feed dogs guide the fabric under the presser foot to avoid putting unnecessary pressure on the needle.  If there are several layers of fabric to be guided under the presser foot consider using a walking foot.  For bulky sections in your sewing consider using a Jean-a-ma-jig to take some of the stress off the sewing machine and needle.  

5.  The needle may be incorrectly inserted.

Make certain that the needle is set all the way up against the stop when changing the needle and securing it in place.  

Previous Troubleshooting Thursday posts:

Skipped Stitches

Puckered Stitches

Broken Upper Sewing Machine Thread

Broken Lower Sewing Machine Thread

Happy Sewing!

Hmmm, What Else Can I Hem?

Last month I tried to sew some handkerchiefs but struggled with negotiating the corners on a rolled hem on my sewing machine.  Readers offered a variety of suggestions from baby hems to mitered corners.  Before researching and trying out these suggestions (thank you!), I turned to my serger instruction book to the section on narrow hemming.  

This is the first time I changed the plate on the serger and fiddled with the dials. First. Time. Ever. I don't know why it took so long to explore some of the tricks and techniques my serger is able to accomplish. This worked out great and then I went searching for what else I could hem.  

I became a kid in a candy store as I searched my fabric stash for some silk and sheer fabrics that I have been holding on as I tried to decide on a seam finish. I was so close to hand stitching a rolled hem but the thought of rubbing medication on my wrist or having to wear a brace afterwards discouraged that thought.

The narrow hem created on the serger was perfect. And before I knew it, I finished hemming three handkerchiefs and five scarves. 

 

The Stats 

Fabric:  4.5 metres

Additional Tools and Supplies:  Serger, thread clippers, rolled hemming needle plate, threads and a cup of tea.  

Happy Sewing!  

Troubleshooting Thursdays: Puckered Stitches

Sewing a seam that gathers when that is not the seam you intended to sew can make you consider if it is time to call the sewing machine repair shop.  Before you throw in the towel fabric, consider checking these possibilities first. 

1.  Check for proper threading of the machine.

It can take one small skipped step in threading a sewing machine to cause seam puckering just as skipped stitches. Your sewing machine manual will have an illustrations and instructions to properly thread you machine with upper and bobbin thread.  Some machines, like my Janome QDC machine have printed illustrations on the body of machine and bobbin cover plate for easy reference.  If you picked up a previously loved machine sewing machine that didn't come with the original sewing machine manual do an online search.  

2.  Check if the sewing machine needed is compatible for the fabric.  

Generally, light weight fabrics (crepe de chine, voile, organdy, tricot) would use a size 9 or 11 needle size.  Medium weight fabrics (linens, cotton, pique, double knits) will use a 11 or 14 needle size.   Heavy weight fabrics (denim, tweed, wool coating, and upholstery) will use a 14 or 16 needle size.  There are also specialty sewing machine needles for sewing other fabrics (leather and microfibres) available at fabric shops.  Always test needle and thread options on a small piece of fabric to select the best combination before starting a project.  

3.  Check the stitch length.

If gathers is what you want, lengthen your stitch length.  To avoid gathering and puckering at the seam making your stitch denser may be the solution.  

4.  Check the presser foot pressure.  

If you're having issues with sewing a pucker free seam it could be the amount of pressure that is being applied by your presser bar.  In general, the heavier the fabric, the more pressure you will need to let the feed dog walk the fabric through.  If the pressure is too much and you're sewing light weight fabric the feed dog cause ultimately damage your fabric. Sometimes, working with certain or many layers of fabric, simply changing your sewing machine foot can help.  Hint:  a walking foot is worth it's price!  But you can also consider an adjustment to the pressure on the presser bar.  Locate the thumb screw at the top of the pressure foot lever.  By rotating the thumb screw clockwise, you will increase the pressure.  Rotate counter clockwise to decrease the pressure.  Many modern sewing machines have a pressure adjusting lever located in the inside front door that you can be easily adjusted.  Check your sewing machine manual if this is the case.  

5.  Check the needle thread tension.  

Adjusting the needle thread tension may be required for certain types of fabric.  If the bobbin appears on the upper surface of the fabric your needle thread is too tight.  Correct this by loosening the needle thread tension.  If the needle thread appears on the underside of the fabric, your needle thread is too loose.  Therefore you should tighten the needle thread tension.  Check your sewing machine manual for adjusting your needle thread tension.

6.  Check out Bunny's comment regarding straight grain vs. cross grain below.

Thanks for sharing this one!  This makes an excellent case for testing your fabric on the sewing machine before you cut out your project.  

What to check out the other Troubleshooting Thursdays posts?  You can find a link to them here:  

• Skipped Stitches
• Broken Upper Sewing Machine Thread
• Broken Lower Sewing Machine Thread

Happy Sewing!

In Sewing News Today...

I woke up to a lovely article on my news feed about the new line of Canada Goose coats designed and created by Inuit designers.  This is actually 2.0, the second year that Canada Goose sponsored this initiative. 

Photo source

These original designs and wearable pieces of art will not be recreated. Instead these original designs will be traveling the globe and sold with the proceeds going back to help community through Inuit Tapiriit Kanatami.  They are currently on display in New York and will also travel to France.  Will you be checking them out?

Also on my news feed was an article on fast-fashion. The opening sentence had me shaking my head. When are journalists going to complete their research and learn that fast-fashion does NOT make "shopping for clothes more affordable?"  Could this be a case of a youthful journalist who lived in a consumer environment post-1990s when fast-fashion took hold of a new generation of consumers who were denied Home Economics education?  

Fast-fashion in itself is designed to be extremely expensive with the economic costs are hidden from consumers with the use of trims, bling and that blinding point-of-sale sticker tag.  Fast-fashion is made with man-made fibres that are not produced to withstand wear and will pill and fall apart FASTER than clothing made with natural fibres.

Fast-fashion is extremely expensive because the sewing techniques used are not those used to make the item last.  As sewists we have learned that taking the time to construct a garment well from the inside with hand-sewing techniques can make all the difference in the look and construction of the garment.

Fast-fashion is all about producing something more expensively in that it needs to be replaced because of its useable lifespan has been shortened.  The environmental impact is that these man-made fibres don't last as natural fibre clothing from our (okay my) past and they don't bio-degrade as natural fibre fabrics.  And it's getting harder to find a clothing label that has a fibre content that isn't a man-made or blend fabric.

This is even happening in the local fabric store as I notice that fabrics in the current shelves at the store do not compare to the quality of the same fabric in my deep stash purchased years ago.  Yes, I am suggesting that we're living in an era of fast-fabrics. Take linen, today you'll often find it often blended with rayon in order to cut the costs of the producers and yet the cost of linen doesn't drop, hiding the increased cost to the consumers. Signs will display the item as linen even when it is the least amount of the fibre that makes up the fabric.  Remember when the price of bacon didn't go up but the amount of bacon inside the package decreased.  Similar marketing trick. Consumers need to be aware of how items are marketed and the subtle changes impact the life-span of not only food, RTW clothing but also the sewing supplies we're sold.

In other sewing news, if you're looking for some inspiration from the Dior exhibit and have missed their tour dates in the past years, there is one more opportunity in a few months.

Well, that's all in sewing news today.

Happy Sewing!

The Perfect White Shirt

Is there such a thing?  If I were to dream, the fabric would be white and made from natural fibres. It would have long sleeves, a menswear style sleeve placket, enough ease incase there are some sweets that I can't resist, and some sort of interesting design detailing.   

{Photo source}

Something that doesn't overwhelm my petite frame with a design features that look like they're trying to hide my overweight shape.  

{Photo source}

A front drape is nice and I do like an asymmetrical hemline.  

{Photo source}

Oh, and pockets!  

{Photo source}

But not breast pockets.  

And not an Audrey Hepburn retro look.  I would like the shoulder seam to sit at the shoulder.  Hmmm, this looks like it might be my latest sewing quest. I'll have to see what I can dig up from the pattern collection.

Happy Sewing!  

Troubleshooting Thursdays: What to Do When Your Sewing Machine's Lower Thread Breaks

Before you pick up the phone to call the sewing machine repair business, there might be a few things to check beforehand that can solve this issue.  

1.  Check to make sure that your bobbin has been properly wound

You will want to start with a empty bobbin.  Don't wind one colour of thread over another to save time.  It isn't worth the hassle if your bobbin threads unevenly.  You want to have your bobbin filled evenly across and in level layers.  If one end of the bobbin is more dense that the other side this can cause thread break issues.  

2.  Check your thread

When it comes to sewing you want to make sure that your upper thread is identical to the lower thread to achieve smooth stitches.  Of course, there are exceptions to this rule, based on specific machines (embroidery) and sewing techniques.  

Elastic thread is used in the bobbin area only to achieve shirring.  For this technique wind the elastic thread by hand until the bobbin is 2/3 full.  You can wind the bobbin by machine but if you do remember to do so at a very slow speed as not to stretch out the elastic thread.  

3.  Check if your bobbin is bent

Just like a bend needle, a bent bobbin can cause thread breaks as it will interfere with the timing of the other parts of the machine.  If your bobbin is bent, just replace it.  This also goes for any bobbin that is worn, nicked or cracked.  

4.  Check for lint built-up in the bobbin case

I can't advocate enough for frequent cleanings. I learned this lesson the hard way, I'm a convert now.  The $ I could have saved / spent on fabric instead of handing it over to the sewing machine repair shop, don't get me started!  Ideally, I like to do this at the end of a project, just before I start the next. 

Don't use canned air to clean out the lint that has accumulated in your machine.  You don't want it to blow into an area that you won't be able to reach.  Take care and time using the lint brush that came with your machine.  You can even pick up a mini vacuum found in fabric store notion departments.  

5.  Check that the bobbin is inserted correctly

Oy, how many times have I failed to insert a bobbin correctly!  I usually catch this before I start sewing as the needle won't catch the lower thread if this is the case.  In some cases if a bobbin is inserted incorrectly and depending on your bobbin case, it can cause the thread to catch on a spring or latch on the bobbin case.  

6.  Check that it's the correct bobbin for your machine

L to R:  Plastic bobbin for Janome sewing machine, medal bobbin for vintage Brother sewing machine, generic plastic bobbin sold at fabric store, bobbin case for Singer treadle sewing machine, full and empty bobbins for Singer treadle sewing machines.  

Fabric stores often sell generic bobbins that they claim with work in a variety of models but sometimes that may not be the case. If at all possible, pick up your bobbins from the sewing machine dealer.  They will carry specific types designed for your machine.  Vintage bobbins are harder to come by.  These can often be sourced from online dealers or second hand shops.  

Happy Sewing!