Thursday 16 July 2015

Peplum Shirt

Stash-busting 2015:  Butterick Peplum Blouse

Many moons ago I spotted this shirt at the mall. It's a Ralph Lauren peplum shirt. It's long gone from the mall landscape (Spring 2014 line), but it still can be found online. When I first spotted it, I thought that it would be perfect for work but I was in the midst of the RTW fast. 


This post is about my own version of the peplum shirt...

The pattern:

Butterick 6097 is the pattern I used which, unlike the Ralph Lauren version, has a pleated peplum. I cut a size fourteen along the shoulders, neckline, armhole and princess seams. The side seams were cut between a size sixteen at the armhole and  eighteen at the waistline. Of course, I had to shorten the sleeves. I didn't make a muslin so I have to say that I'm quite lucky with the fit. I did have to however take in the back across the waistline seam to account for some bagginess above the waistline. It is an adjustment that I will have to keep in mind if I make this shirt again.  


The pattern is well drafted and all the pieces worked together beautifully. The sleeve was a dream to insert. How well everything fit together is my favourite aspect of this pattern. The instructions are well written as well. I did stray a bit regarding the instructions. Instead of hemming the peplum before creating the pleats and attaching it to the bodice piece, I saved the hemming until almost the end. It would have been easier to follow the instructions order but I was unnecessarily concerned if the length would be an issue.   

The pattern does ask for interfacing to be cut for the whole cuff piece which is folded. I cut 1/2 of the cuff pattern piece for the interfacing after seeing the thickness of the front bands. I didn't mind the thickness with the double interfacing in the front band pieces but I felt that it was unnecessary for the cuffs.

I also used the instructions from The Dressmaker's Handbook of Couture Sewing Techniques by Lynda Maynard to create an embellished collar band. The Ralph Lauren RTW version has a contrasting collar band. My version has a ribbon embellishment. 


I used a narrow basting tape to hold down my ribbon during the placement and sewing process.


The basting tape worked like a charm. It made sewing close to the edge of the ribbon effortless and without concern that the ribbon might slip out of place. I can say that I'm thrilled with how it turned out.  



The fabric:

I found this 100% cotton deep green and burgundy striped fabric in the discount section of my local Fabricland store earlier this year. It was the discounted price and the fact that it's 100% cotton that drew me to the fabric (mostly the discounted price). I have to admit that I really wasn't all that smitten over this fabric when I picked it up but it has grown on me since then. The fabric was pre-shrunk by laundering on the regular cycle, a toss in the dryer for forty minutes and then a good pressing on the cotton setting. The fabric held up well and so did the colour.  


The burgundy buttons were a perfect match and discovered in Mama R's button stash. The threads used were left-overs from another project.  

The Stats:

Fabric:                       2.1 metres 100% cotton $14.24 ($12.00 / metre - 50% off + taxes)

Interfacing:            0.9 metres fusible interfacing $3.05 ($6.00 / metre - 50% off + taxes)

Basting Tape:         0.5 metres $0.55 ($0.98 / metre + taxes)

Ribbon:                     0.5 metres $0.25 ($0.45 / metre + taxes         

Thread:                     Finished off 2 spools of thread 

Buttons:                    9 - 12 mm burgundy coloured shirt buttons $0.00 (recycled)

Pattern:                     Butterick 6097 $10.14 ($17.95 - 50% off + taxes)

Reference Book:       The Dressmaker's Handbook of Courture Sewing Techniques 

Sewn on:                  Janome using a walking foot, buttonhole foot and regular presser foot.  

Hand-stitches:      Slip stitched cuff, front band, and collar band.  Hand-stitched buttons.   

Seam Finish:          The inside seams have been finished with a Janome overlock machine.  

Happy Sewing!  




9 comments:

  1. What a great work shirt. Would love to see it modelled. ;)

    ReplyDelete
    Replies
    1. Thanks Janet. I need to find someone to play photographer since the timer on my camera is the worst.

      Delete
  2. Ah. I really like this one! I don't know why I was surprised you sewed a peplum...??

    ReplyDelete
    Replies
    1. Thanks! Lol, and would you believe that I have McCall's 7021 on my want-to-make pile of patterns? I'm in trouble if peplums go out of style.

      Delete
  3. Really great looking shirt! Makes me want to make one like it.

    ReplyDelete
    Replies
    1. Thanks Beverly! I would recommend this pattern, for sure! It is a comfortable shirt and I like the fit from the princess seams.

      Delete

Stash busting: Cotton Knit Tee / Closet Core Ebony

  This is the third version of Closet Core's Ebony t-shirt pattern and it's my favourite one.  There were small subtle changes to t...