Saturday 28 July 2012

Jean-a-ma-jig!


Have you used or even seen this little piece of plastic? This is another sewing aid that I discovered recently discovered during the sewing class.

It is called a Jean-a-ma-jig and what a handy little tool.  

It only measures 4 mm deep, 5 cm long and 37 mm wide.  The cut out portion is 6 mm wide and about 2.5 cm long. 

It is promoted as an item to help jump the bumps where seams are bulky, such as a jean hems.  


Seriously, this little tool can be used with other fabrics that cause bulk. I'm thinking about that section of topstitching that I was not able to complete on the collar section of the Donna Karan jacket, Vogue 1263.

Unable to jump that hump, I simply lifted up my presser foot, raised my needle and shifted the fabric over the section that was causing the issue. If I tried to tug the fabric from behind the presser foot I would risk breaking my needle or worse damaging my plate cover.

If I had the jean-a-ma-jig I could have successfully topstitched over the bulk.

Here is how it works.

As you approach a section in your sewing that has bulk it has an increased height. The front section of your presser foot begins to raise as it tries to sew through the section.

This is when you want to stop your sewing for a moment and raise your presser foot. Slide the Jean-a-ma-jig from behind over the stitching you have already done to give a lift to the presser foot from the bottom.

Doing sew allows the presser foot to be at a even height with the bulk that you are trying to sew over. It works like a charm. You can now continue sewing.

Some tutorials suggest once the bulky section is sew over that you will want to place the Jean-a-ma-jig in front of the presser boot as the bulk decreases in thickness. I didn't find this necessary and it wasn't taught that way in the sewing class I took.

What was I sewing?

I made a little slip cover for an ice pack. I used a flannel Eddie Bauer fabric and some denim that I had in the scrap pile. The two fabrics were of different thickness and that caused some additional bulk at the side seams. But it was all good with the Jean-a-ma-jig.

I'm adding this little tool to my new top ten list of favourite sewing tools.



4 comments:

  1. Well...isn't that interesting! I have broken many a needle trying to hem jeans and such! Thanks for the tip...do you know if I can get this at my favourite Fabricland??
    Patty

    ReplyDelete
    Replies
    1. I'm not sure Patty, I would think so since they have a large quilt fabric section and I found out it is an item also used by quilters. I would suspect the chances are good they would have this item. I picked up this one at Quilt as Desired here in Winnipeg.

      Delete
  2. Ok, how cool is that!!!! I feel like someone just showed me the wqheel for the first time. Must have!!!!

    ReplyDelete

Stash busting: Cotton Knit Tee / Closet Core Ebony

  This is the third version of Closet Core's Ebony t-shirt pattern and it's my favourite one.  There were small subtle changes to t...